SolisTek A1+ 1000w Grow Light Systems Hydroponics Grow Lighting

SolisTek A1+ 1000w Grow Light Systems - Hydroponics Grow Lighting. SolisTek A1+ 1000w Lighting System produces incredibly high levels of PAR light of up to 2,100 umols! Spreads light to the furthest corners of your growing area thanks to the SolisTek A1 Reflector.

Features "Ignition control" & "SmartSense" diagnostic checks to ensure your lamp and ballast are run in perfect harmony. Surprisingly light weight yet highly durable and easy to install. Combine with the SolisTek Lighting Controller. For complete lighting control of up to 300 lights! SolisTek lamps are tuned for optimal light output with SolisTek Lighting Systems.

Uses 230V double ended lamps, that produce up to 20% more PAR than single ended lamps. Adjustable wattage output of 600w, 660w, 750w, 825w, 1000w, 1100w to suit any size grow area. Standard system includes the SolisTek 1000w 2K DE HPS Lamp.

Complete system includes the SolisTek 1000w DE 4K daylight, 6K dark blue and 10K finishing lamps. The SolisTek A1+ is the cumulation of years of research and development for the perfect horticultural grow light. High Quality and High Performance, the SolisTek A1+ 1000w Lighting Systems.

The professional and incredibly high-output 230V SolisTek A1+ 1000w Lighting System delivers both optimum light quality and unparalleled reliability, allowing you to get the most from each and every harvest. The SolisTek A1+ 1000w Lighting System can utilise both high pressure sodium (HPS) and metal halide (MH) double ended lamps which flood your grow room with high levels of plant usable light. The SolisTek A1 Reflector's ability to distribute light evenly and effectively covers even the furthest reaches of your growing area. The standard system includes the SolisTek 1000w 2K DE Lamp, where as the complete kit includes the SolisTek 4K, 6K and 10K 1000w DE lamps, so you can switch each lamp in or out depending on your current period of growth or bloom grow, providing you with the ultimate in grow lighting control for all stages of a plants life.

How the SolisTek A1+ 1000w Lighting System Works. The SolisTek A1+ 1000w Lighting System is a complete fixture with the ballast attached directly to the dimpled SolisTek A1 Reflector, which spreads light evenly throughout the growing area, while allowing heat to dissipate through its ventilation slits. SolisTek designed this lighting system with the professional grower in mind and ballast features "Ignition Control" plus "SenseSmart" technology to power your SolisTek lamps properly.

This slowly increases the amount of power to the lamp instead of allowing too much raw power to go straight to the bulb, this both protects the lamp and extends its lifespan. The SolisTek Lighting System Ballast can be dimmed using the knob on the back of the ballast, this allows further control of the light produced and can come in handy when outside temperatures are causing indoor problems.

Use the SolisTek 6K Dark Blue lamp for vegetation, as it produces a high concentration of blue and purple light, for shorter and tighter inter node spacing and bushier, healthy growth. The SolisTek 4K Daylight is for the later vegetation period as this lamp provides full spectrum lighting, high in the blue, green and yellow spectrum, perfect for vigorous and robust growth which leads nicely into the flowering period. You can then use the excellent SolisTek 2K HPS to flower off your plants, before switching to the SolisTek 10K Finishing Lamp with its unique spectral output for the final week to ten days. This adds extra quality via UV light to your end product, literally allowing it to finish to perfection. When Do I Switch Between Lamps? SolisTek have created a range of lamps, harnessing a spread of lighting spectrums to compliment every period of a plants life cycle. From the earliest seedlings stages, through to late flower, helping you produce the best possible results every time. The veg weeks and flowering weeks illustrated below are for guidance only. Veg Week 1-8: Begin with the SolisTek 6K Blue Lamp for your seedlings, rooted cuttings and young plants, as this lamp promotes bushy, dense growth with tight internodes. The SolisTek 6K Blue is high in blue, purple and green light, making it excellent for all your vegging needs.

Use until a couple of weeks before you're ready to flower (depending on how long you're vegging for, typically 4-8 weeks). Flowering Week 1-2: Two weeks into flowering switch to the SolisTek 4K Daylight Lamp, which is higher in green and yellow light whilst still containing large amounts of purple and blue light, making it a full spectrum lighting source similar to sunlight.

The SolisTek 4K Daylight still promotes healthy, upward growth while increasing essential oil content as the first flower sets form. Flowering Week 3-7: Switch to the SolisTek 2K HPS Lamp as your primary light for most of the flowering period. High in yellow, orange and red light the SolisTek 2k HPS Lamp stimulates rapid, heavy flowering formation. Flowering Week 8-9: One or two weeks prior to harvest switch out the SolisTek 2k HPS Lamp and replace it with the SolisTek 10K Finisher Lamp. The SolisTek 10K Finisher Lamp has a unique spectrum.

Very high in UV and deep blue light its especially useful when used on plants deep into flower, as it promotes increased essential oil production on your heavy-set flowers, further adding quality to your end product. To see our full 1000w Grow Light Kits range. Your choice of SolisTek A1+ 1000w Lighting System (choose your system option above) Standard System includes: 1x SolisTek A1+ 1000w Lighting System 1x SolisTek 1000w DE 2K HPS lamp 1x Probe (for use with the SolisTek Lighting Controller) 1x Auxiliary lead (for use with the SolisTek Lighting Controller) 1x Power cord.

Complete System includes: 1x SolisTek A1+ 1000w Lighting System 1x SolisTek 1000w DE 2K HPS lamp 1x SolisTek 1000w DE 4K MH lamp 1x SolisTek 1000w DE 6K MH lamp 1x SolisTek 1000w DE 10K MH lamp 1x Probe (for use with the SolisTek Lighting Controller) 1x Auxiliary lead (for use with the SolisTek Lighting Controller) 1x Power cord. How to Use the SolisTek A1+ 1000w Lighting System. Simply hang the combined ballast & reflector over the centre of the grow-space at an appropriate height using easy rolls, rope ratchets or jack chain.

Holding your lamp with a clean cloth insert the SolisTek 1000w 2K HPS lamp into the double ended lamp holder in the SolisTek A1 Reflector and insert the end displayed below closest to the ballast then press it in firmly. Set the power control switch to the desired power output and run the 2m power lead from the ballast to a standard UK mains outlet or your contactor and switch on. SolisTek recommends that the reflector is changed regularly to maintain garden efficiency because the reflectivity of the surface does degrade a little over time. We would recommend every 1-2 years.

Warning 1: When it is time to change out the lamp, make sure that it is replaced with another SolisTek HPS or MH lamp, these lamps are purpose made for the SolisTek A1+ 1000w Lighting System and run more efficiently when combined. Warning 2: When HID lamps are switched on they run extremely hot.

As with all high-pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

Note : The SolisTek A1+ 1000w Complete Grow Light runs at 230 volts not 400 volts. Only use SolisTek 230v double ended lamps with this grow light. Fitting your Double Ended Lamp. To fit your double ended lamp correctly see the image below. Get in touch for more information. Get In touch for more information. This item is in the category "Garden & Patio\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "onestopgrowshop" and is located in this country: GB. This item can be shipped to United Kingdom.

Light: Standard System
Brand: Unbranded
Type: Lighting Kit