Grow Light Kit

Lumatek Ballast Dimmable 250With400With600With1000W & Twin 600W 240v Hps Controller

Lumatek Ballast Dimmable 250With400With600With1000W & Twin 600W 240v Hps Controller
Lumatek Ballast Dimmable 250With400With600With1000W & Twin 600W 240v Hps Controller

Lumatek Ballast Dimmable 250With400With600With1000W & Twin 600W 240v Hps Controller
Lumatek - Ballast Dimmable 250W/400W/600W/1000W & Twin 600W 240v Hps Controller. Lumatek - Ballast Dimmable 250W/400W/600w/1000W & Twin 600W - 240V - Light Kit. Lumatek - 250W 240V - Electronic ballast for 150W, 175W or 250W HPS or MH lamp High performance with low power consumption and operating cost make the LUMATEK 250W a great ballast for beginner and professional growers of light-sensitive crops. A ballast is necessary to light high intensity discharge (HID) lamps such as high pressure sodium (HPS) and metal halide (MH) grow lamps. Depending on the type of crop and light cycle required, ballasts run continuously 8 - 24 hours a day and must therefore be as efficient as possible.

With less energy wasted as by-product heat Lumatek ballasts create more light from less energy consumed. Conventional core & coil magnetic ballasts waste a large proportion of the energy consumed as by-product heat, can experience a reduction in performance over time and can even catch fire through extended use. Selecting the Super Lumens (SL) switch setting on Lumatek ballasts boosts power output to HPS lamps by 10% increasing luminosity and PAR/PPF levels. We do not recommend dimming or boosting MH lamps which should be matched with the same power setting eg.

250W lamp at 250W and 150W lamp at 150W setting. Lumatek ballasts are supplied complete with fixed-cable connectors ready for immediate use'plug & play'. Lumatek - 400W 240V - Electronic ballast for 250W or 400W HPS or MH lamp umatek 400W digital ballasts are dimmable and produce consistent stable light output which is ideal for pharmaceutical agriculture, controlled-environment horticulture and other uses where precise regulated output is essential. Lumatek ballasts are microprocessor-controlled and feature intelligent start with sequential switching to light lamp faster with safe management of inrush current and balanced load across ring circuit to avoid tripping breakers. When dimming or boosting lamp the ballast uses'soft dim feature' to change power output gradually to protect lamp. Lumatek 400W digital ballast is extremely efficient producing very little heat and for safety uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. Four power-output settings at 250W, 250SL, 400W & 400SL. Boost power by 10% by selecting SL settings.

Lumatek - 600W 240V - Electronic ballast for 250W, 400W & 600W HPS or MH lamps The Lumatek 600W digital ballast provides a stable precise voltage to the lamp creating a higher PAR/PPF output and yet is far more energy efficient than most other ballasts on the market. The latest high output 600W horticultural ballasts from Lumatek are designed to give high yeilds of top quality results, year after year. Featuring 4 different settings from 250w to 660W, Lumatek Digital ballasts can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps. The proven robust Lumatek 600W Digital Ballast uses best quality components and is so reliable it comes with free 5 year guarantee.

Featuring intelligent start up and soft-dimming facility the Lumatek 600W runs extremely efficiently generating much less heat than other conventional ballasts and runs silently. As with all Lumatek Ballasts, the latest Lumatek 600w Digital Ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. Lumatek - Twin 600W 240V - Electronic ballast for independent control of 2 x 400W/600W HPS & MH lamps. The Lumatek Twin 600 is two 600W dimmable multi-watt electronic ballasts housed in one case and designed to be able to power and control two HPS or MH horticultural lamps independently. This unit features two separate lamp leads with IEC and two separate output power controllers with four different power settings enabling dimming and boosting power or selecting specific output for different rated lamps.

The Twin 600 also has separate safety and auto-recovery with full independent circuit protection for each lamp. As well as being better value than purchasing two separate ballasts, the Twin 600 is able to drive two separate lamps but only requires one power supply plug socket! Voltage regulator electronics ensure precise lamp voltage for producing optimum PAR spectrum (PPF/PPFD) regardless of mains voltage fluctuations Extra 10% power boost from'Super Lumens' switch Dimming switch for enhanced environmental-parameter control Intelligent start algorithm to prolong lamp life and prevent multiple unit ignition from tripping circuit breakers Ultra-high operating frequency produces better quality light and ensures against strobe flicker Cost savings from improved efficiency; more light is produced per watt of energy consumed. Lumatek - 1000W 240V - Electronic ballast for 1000W, 750W or 600W HPS lamp or 1000W or 600W MH lamp Introducing the amazing new 1000W Lumatek Digital Ballast. This state of the art digital lighting ballast is one of the most powerful and reliable digital ballasts currently available today.

With 30% more lumens than a standard magnetic ballast, the Lumatek 1000w actually uses far less energy too - making it more economic to run and giving higher yields than previously possible. Featuring 4 different settings, including Super Lumens boost - the Lumatek 1000w Digital Ballast can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps. This fantastic Dimmable Digital Ballast is so reliable it comes with an amazing 5 year guarantee and for safety uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

The Lumatek 1000W also features a fast start up facility and generates much less heat than other conventional ballasts. Enjoy longer bulb-life too with this high capacity digital ballast, as the Lumatek 1000w is incredibly stable and reliable, ensuring unbeatable grow room results. EVERYTHING WE SEND OUT IS IN PLAIN PACKAGING..

Alternatively you are more than welcome to collect your order from our premises in cambridge and browse our shop which stocks over 1000 products. Items less than 2kg in weight can be sent throughout the UK and N. Offshore British mainland please message for a quote. And if you are unsure about the weight of your order please message first for a quote. Welcome to CamGrow's online Hydroponics and Horticultural Superstore. We have thousands of products for all your hydroponic and horticultural needs available in our Cambridge shop and are busy adding them to this website. It is in original undamaged packaging with all tags intact.

The product is in the same condition as how you received it. You have a statutory duty to take reasonable care of our goods whilst they are in your possession and during transit.

We are always more than happy to help with any questions you may have! This item is in the category "Garden & Patio\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "fossie33" and is located in this country: GB. This item can be shipped worldwide.

  • Lumatek - Ballast 240V + Bulbs: Lumatek - 250W 240V
  • Features: Silent-running
  • Manufacturer Warranty: 1 Year
  • Custom Bundle: No
  • Energy Efficiency Rating: A+++
  • Modified Item: No
  • Lighting Technology: HID
  • Suitable For: Flowering, Maintaining Mother Plants, Rooting Cuttings & Seedlings, Vegetative Growth
  • Country/Region of Manufacture: Netherlands
  • Number of LEDs: 0
  • Input Voltage: 240 V
  • Wattage: Dimmable 150W to 1000W
  • Spectrum: Full
  • Brand: Lumatek
  • Dimming Settings: 25%, 50%, 75%
  • Socket Size: E40
  • Type: HPS (High Pressure Sodium)
  • Installation Area: Indoor
  • EC Range: A+++ - G


Lumatek Ballast Dimmable 250With400With600With1000W & Twin 600W 240v Hps Controller