The GN Telos range of LEDs is the result of years of dedication and hard work from UK based company, Grow Northern. Built to exacting standards, their robust design has been proven time and time again to produce dense, abundant crops with a very low power draw. The Telos 10 Pro uses a tiny 285w but has a huge output of 2.5µmol per watt and 694.4 PPF. It features superior performance Osram diodes for unbeatable performance.These diodes are made up of around 60% white light and 40% red which deliver a full spectrum light output perfect for all stages of plant growth. The Telos 10 Pro will easily outperform a 400w HPS light and even some 600w! Each component has been meticulously sourced and tested in the UK. The industry leading driver remains extremely cool during operation and requires no fans in order to do so making it completely silent during operation.
It will efficiently drive the diodes for around 85000 hours with very little degradation. Now you can take control of your grow room even further with Telos Mesh! This brand new tech allows you to precisely control a vast number of Telos LEDs securely and wirelessly from your smartphone! The new Mesh technology from Telos takes lighting control to new heights. Supplied as standard on all of our new units (and also available as an easy to install upgrade for existing owners of the standard'Pro' model), the Mesh driver allows you to control 1000s of Telos units from your smartphone.What's more as everything is controlled via Bluetooth you don't even need wires! Completely secure, end-to-end encrypted Bluetooth network connectivity. Once you connect your device the units will no longer broadcast the network making you completely invisible to anyone searching. Schedule your lights on/off times all from the app and without the need for contactors or timers. Sunrise/sunset mode to turn your lights on/off and gradually increase or decrease the power. Group multiple lights together and assign specific settings to them.
Select the precise PPF output of your lights without the need for a quantum meter via the app as well as wattage. RTC module allows your lights to hold their time and schedule for 24 hours without power. How To Use The GN Telos 10 Pro Mesh LED Grow Light.Since the original GN Telos 0010 was created there have been various changes made to the unit until its current form; the Telos 10 Pro Mesh. One of the most noticeable being the brightness and coverage of light. The new Osram diodes dramatically increase brightness and PAR output from the original model as well as also running cooler. An update to the lenses also means the units now deploy a wider beam angle than before which is almost close to 100 degrees. This allows the unit to still be mounted at the same height but a better and wider coverage is achieved. The GN Telos 10 will adequately cover an area of 1.0m², however, it could be used in a 1.2m² area very effectively. The light coverage makes it an ideal lighting solution for the. However, many growers choose to run two or more, side by side. In which case a larger tent will be required. Please check out our range of. To find the perfect solution for your grow space. Telos recommend a light height from the canopy of around 60-80cm during flowering.
Please remember this is only a guide. Generally, plants can take time to adjust to LED lights.
When you first place your plants under your LED lights, we recommend either turning down the power or placing your lights at a slightly higher distance from the light to the top of the canopy. Keep a close eye on your plants and over the next few days the light height can be slowly reduced, or the power can be slowly increased. If your plants show any sign of stress e. Wilting or leaf discolouring you should increase the height accordingly. The GN Telos lights come with a robust hanging kit with durable metal eyelets on each end to ensure secure hanging.
The units boast a 85,000 hour lifespan and on a 12/12 cycle you can achieve over 10 years of continuous use from these innovative units. You will not need to change a single lamp over this time period. Unlike HPS lights, there is very little degradation overtime, this means that not only will you not have to physically change bulbs, but your diodes will still be producing near on the same output, year in, year out, just like they did when new, whilst only degrading around 1-3% per year.
LED lighting solutions can potentially save 40% on electricity and studies indicate that LED-lit canopies can generate more yield per kWh. With studies showing growers using LED lighting may experience yield increases and changes in cannabinoid and terpene profiles, leading to more consistent medicinal product profiles from harvest to harvest. Colour Rendering Index (CRI) - 86.9. Luminaire Colour Temperature (Kelvin) - 3160.
Power Input Range - 28.5 - 330W (Dimmable Driver). Voltage Input Range - 90 - 305 VAC (Auto-sensing).
Frequency Input Range - 47 - 63 Hz. Input Current - 1.25A / 230VAC. Max Number of Telos Systems Linked (Power) - 6. System Weight (Lamp and Driver) - 6.5KG.
Dimensions (L X W X H) - 519mm, 236mm, 117mm. Nominal Operating Temperature - 0 - 40 °C.
This item is in the category "Garden & Patio\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "hortiworks" and is located in this country: GB. This item can be shipped to United Kingdom.