Innovative halo design produces uniform coverage and deeper light penetration to maximize plant yields. Specially formulated with full-spectrum Samsung LM301H white, red, and IR LEDs optimized for all grow stages.
Linear bar light design adapted into four-sided halo form factor to achieve commercial lighting output. Digital controller with daisy-chaining ports featuring PWM dimming, timers, cycles, and scheduling. Air-suspended driver over aluminum heatsink passively cools LEDs to last longer and boost PAR output.
An indoor LED grow lamp with an innovative halo design crafted to maximize plant yields by providing uniform coverage and deeper light penetration. This LED grow system uses the latest Samsung LM301H diodes to efficiently produce full-spectrum lighting fit for use during the germination, vegetative, and flowering stages.
The grow tent light is built with a raised LED driver, set on top of an aluminum frame with a thermal compound for no-noise heat dissipation. It is primarily set in grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. Each unit is plug-and-play, and includes a set of rope hanging hardware to be ready for use out of the box.
This product is a part of the UIST platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. These light-emitting diodes are arranged in a halo ring form factor, which allows for even coverage and deeper penetration.
This lighting maximizes your grow tent's capacity and growth potential by expanding the amount of usable growing space and reaching past your plant's canopy. The diodes' arrangement also enables the LED grow light to achieve commercial bar light performance and provide full coverage in 2x4 spaces.
Each system includes a programmable controller that is capable of efficient 0-100% PWM dimming. Set consistent light schedules, light cycles, and timers.
Customize transitions that can mimic the gradual dimming of sunrise and sunset. Features baseline brightness levels and backup memory in case of a temporary power loss. Controllers can be detached to be mounted remotely and are built with extension ports to provide programming to additional LED grow lights.1 x Cloudline A6 inline duct fan. 12.99 x 12.99 in. (33.0 x 33.0 cm).
3.30 x 1.18 x 0.70 in. (8.4 x 3.0 x 1.8 cm).
Product Performance and Technical Specs. AC Infinity Proprietary Driver, Model GTS-100. Designed to quietly ventilate grow tents, exhaust odours, transfer heating/cooling to rooms, and cool AV closets. Features the same build quality and innovations as the CLOUDLINE Series delivered in a value package.Includes a wired 10-speed fan controller; also compatible with all CLOUDLINE Series smart controllers. Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance. This inline fan system packs the CLOUDLINE's core innovations and premium build quality. Together to bring you a value package. Designed to quietly cool grow tents, rooms, and closets, and provide ventilation in various air circulation and exhaust projects.
Features an inline speed controller utilizing PWM-technology. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. The motor box containing the fan's impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one inline fan unit, one speed controller, USB Type-C to 4-pin Molex dongle, installation manual, and all necessary mounting hardware.
The speed controller enables you to set the duct fan's speed to optimal noise and airflow levels for various environments. This inline fan is equipped with the CLOUDLINE Series' same EC-motor that is precisely controlled using PWM (Pulse Width Modulation), which enables it to run smoothly at extremely low RPM speeds without generating motor noise.
Ten speed options are available with power switch and backup memory. This model can be connected to the controller 67 to share the same programming and power source as other EC-motor CLOUDLINE fans. QUIET AND ENERGY EFFICIENT DESIGN.
The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. In addition, the inline fan is crafted with a plastic mounting base to diminish noise as a result of fan vibration.
The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. This quiet inline fan system is most found in hydroponic grow tents and rooms to provide cooling and ventilation for plants. Its low noise and advanced control features make it fit for bathroom and attic settings, as well as cooling AV equipment. A digital controller Designed to equip AC Infinity fans with smart controls for HVAC or growing applications. Dynamically adjusts fan speed based on temperature and humidity conditions to produce optimal airflow.Programming includes automated triggers, timers, cycles, scheduling, minimum speed, and custom transitions. Features a powder-coated black body with a digital LCD display and a corded thermalloy sensor probe. Supports up to two CLOUDLINE, AIRLIFT, or CLOUDRAY fans with EC motors to share the same programming. A digital controller designed to enhance your AC Infinity fan with smart controls to maintain a stable climate.
This intelligent command unit features a black powder-coated body and a backlit LCD screen that presents a sleek aesthetic. The display has three brightness levels, as well as two auto brightness settings, and reads temperatures in Fahrenheit or Celsius. It includes a 12-foot sensor probe with a waterproof thermalloy head that accurately detects current temperature and humidity conditions.
The controller's 4-pin Molex fan ports can simultaneously power two fans to share the same fan speed and programming. Functions include automated triggers, timers, on/off cycling, and scheduling. The smart auto modes trigger your fan to activate in response to climate changes. Its fan speed can dynamically adjust itself to current temperature or humidity levels, producing optimal amounts of airflow. The fan speed can also operate in an optional minimum setting to maintain cooling and ventilation.
Timer, on/off cycle, and schedule modes add custom on-demand activation for a variety of uses. The built-in Molex ports allow you to pair two fans together to share the same programming and achieve more airflow. This intelligent controller is compatible with the following fans with EC motors.CLOUDLINE Series of inline duct fans. AIRLIFT Series of shutter exhaust fans. CLOUDRAY Series of whole house fans.
Product and Mounting Dimensions - Controller. 5.19 x 2.91 x 1.06 in. (13.2 x 7.4 x 2.7 cm). 4.71 x 2.64 in.
(12.0 x 6.7 cm). Ø 0.119 in (Ø 0.3 cm). 3.5 x 1.4 in.
(9 x 3.5 cm). This item is in the category "Garden & Patio\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "substrateseller" and is located in this country: GB. This item can be shipped to United Kingdom.