Select the lamp type and wattage and the ballast will run the lamp to the exact specification that the lamp requires, just as if the ballast was dedicated to that lamp. It's like having three separate ballasts in one unit.Reduce the output of your lamp when not so much power is needed. For example, if you are running a 600w lamp you can reduce the output to 400w or 250w. Boost the output of your lamp using "Super Lumen" feature. This allows the output of the ballast highest rated lamp (600w) to be increased by approximately 10% delivering maximum lamp performance.
Dimmable Digital Ballast allows lamps of various wattages to be operated in the same unit simply by adjusting the dial on the ballast. This will run 250w, 400w and 600w lamps. Each lamp will be operated to the exact specification that the lamp requires.
By turning the dial on the Digital Ballast you can reduce the output of a lamp when not so much power is needed. Just turn the dial again to step back to full power. The Over-Drive feature will increase the output of the ballasts highest wattage lamp to achieve maximum lamp performance. Soft Start Technology: This feature ensures that the Digital Ballast is the safest, most reliable and energy efficient digital ballast when used in automated multiple lamp applications.
When multiple units are connected to the mains circuit, the integrated Ignition Control software will completely balance the electrical draw by igniting one lamp at a time to prevent electrical surges and spikes that can overload the mains circuit and trip circuit breaking systems. Soft Start Technology also prolongs lamp life by stopping current rush to the lamp and preventing lamp overload. When the ballast is started from cold there will be a 3 second fixed delay before ignition. After ignition there will be a series of random 0-2 second delays before full brightness is reached after approximately 3-5 minutes.Soft Start Technology is also activated when increasing and decreasing power to the lamp using the'Smart-Step' feature. Re-Strike of Hot Lamps after Mains Failure: Our Digital Ballast uses a timed re-strike system that prevents the ballast from re-striking a hot lamp after a power failure.
If a hot lamp is detected, the re-strike will be delayed for 60 second intervals until the lamp has cooled sufficiently to be re-ignited. Omega "Super Lumen" Digital Ballast is suitable for use with High Pressure Sodium (HPS) & Metal Halide (MH) Lamps. Omega "Super Lumen" Digital Ballast automatically adjusts its output frequency to maintain a constant output regardless of input power fluctuations and ageing lamps. This also prevents'lamp flicker'. Omega "Super Lumen" Digital Ballast has no noisy internal fans and is completely silent in operation.
Omega "Super Lumen" Digital Ballast is up to 30% more efficient than a standard magnetic ballast producing more lumens of light per watt of consumed energy. Efficiency does not diminish and is maintained for the entire life of the unit. This is a large umbrella shaped reflector with vertical lamp fitting.
It comes flat packed ready for self assembly by the customer. Nuts and bolts are provided. Popular reflector suitable for CFLs HPS Metal Halids from 125watt upto 1000 watts. The item "Omega 600W Digital Dimmable Ballast Parabolic Shade Grow Light Kit Hydroponics" is in sale since Friday, November 21, 2014.This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Grow Light Kits". The seller is "a1mhydro" and is located in Wakefield, West Yorkshire. This item can be shipped to United Kingdom.