Lumii Ballast 600w available in both 600w, has been redesigned for improved quality and high output, and continues to boast a fully enclosed and potted case. As with all LUMii® ballasts, you are able to get the true output that your plants need.Immature plants have different needs to those about to mature. To maximise the potential of a plant and ensure that it grows strong and healthy, you need to deliver just the right kind of light radiation.
These bulbs have been enhanced to produce the perfect balance of blue and red light and benefit your plants at crucial stages in their development. The SunBlaster Dual Spectrum lamp is scientifically designed and developed for the complete lifecycle of a plant. This produces the full light spectrum with added blue for the propagation and vegging stages. Although these lamps are produced to an extremely high standard, the performance will drop off over time.We recommend you replace lamps every 3-6 months to avoid diminishing harvests. Lamp size and output SunBlaster 400 watt - 56,000 Lumens SunBlaster 600 watt - 93,000 Lumens Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant LUMii MAXii Reflector It is an open ended highly polished and dimpled lightweight reflector which gives an efficient and even distribution of light. Unlike others on the market, the LUMii MAXii includes a unique lamp holder that is adjustable and designed to fit all E40 lamp types.
All earth requirements are incorporated into the lamp holder itself. This safety feature means that there is no need for additional components. A unique feature of this reflector is that with the addition of the LUMii HID to CFL Converter (this is not included see item number: 261614853685) Set contains a short additional cord set to convert the supplied IEC to a conventional power supply as well as an innovative support device to assist with the additional weight of a CFL lamp and to make sure the lamp stays horizontal. With the LUMii MAXii system and the CFL Converter Ki, t you can use a cool CFL lamp for vegetative growth.
Then if you are flowering switch to an HPS lamp by simply unplugging the converter plug and plugging into a LUMii ballast; all without taking your reflector down or changing it. No other reflector does this - it is easy! L: 470mm x W: 430mm x H: 190mm The LUMii MAXii comes as a complete HID reflector set and is supplied with hanging hooks as per picture E40 Screw Fitting LUMii 24 Hour Timer Automate your grow room with the Axiom 24 Hour Plug In Timer The Lumii 24 Hour Plug In Timer is ideal for setting on and off (day and night) periods with CFL, T5 and LED grow lights and timing pumps for irrigation cycles. It is reliable and has a high quality timer unit that has been designed to take a 13 amp plug - no need to remove the plug to reset the controls.There are 96 switching operations within a 24 hour period (every 15 minutes). LIGHTHOUSE Tent The LightHouse LITE 1m² Tent has extraction through the roof with a 250mm (10") sock and 2 x inline 250mm (10") socks for use with air-cooled lighting. There are also 3 x low level passive air vents with fine (anti-mite) mesh and it also includes light proof covers for when they are not in use. The LightHouse LITE 1m² Tent is ideal for use as a drying storage environment when used with the LightHouse DryNet. The LightHouse LITE 1.2m² Tent has extraction through the roof with a 250mm (10") sock and 2 x inline 250mm (10") socks for use with air-cooled lighting.
The LightHouse LITE 1.2m² Tent fits most growing systems and is ideal for the PLANT! T aeros IV Master System. The LightHouse LITE 2.4m Tent has extraction through the roof with a 250mm (10") sock and 2 x inline 250mm (10") socks for use with air-cooled lighting. There are also 2 x low level passive air vents with fine (anti-mite) mesh and it also includes light proof covers for when they are not in use.
The LightHouse LITE 1m Tent is ideal for 2 large plants or 8 mid-size plants. Fan Kit FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3 Air Flow SMF100S - 220m3/hr High / 160 m3/h Low 2 speed switch on terminal box - Fan comes with plug Carbon Filter Size 100mm x 250mm To get the most out of your kit, please follow these few tips: Remember, if you reverse-mount your PRO Filter you will lose the benefit of your pre-filter and reduce the life of the carbon. Always mount your PRO filter as high as possible.Hot air naturally rises and so will your odours! Try not to block too much of the filter with mounting straps or hanging devices.
Use the ends of the filter to support, so not to inhibit the surface area of the filter. Do Not mount your PRO Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours! Ensure you have an airtight seal around the connection of your PRO filter to ducting or extractor fan. The item "LUMii LIGHTHOUSE Hydroponic Grow Tent Kit HPS 400w 600w 1m x1m to 1.2 x 2.4" is in sale since Friday, February 20, 2015.This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Grow Light Kits". The seller is "hydroponics4less" and is located in Solihull. This item can be shipped worldwide.