Grow Light Kit

Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit

Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit
Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit
Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit

Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit
Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit. Give Your Plants Sunshine Indoors with the LUMii Solar Fixture & Elite CDM Bulb. When it comes to growing a quality end-product, nothing quite compares to CDM (ceramic metal halide) lighting. When used in combination with HPS lighting, the two give rise to healthier plants full of. Leading to larger yields of better quality. The LUMii Solar 315w CDM Fixture and Elite 315w CDM 4000k Bulb. Whilst this is a high-end grow light, it comes in at a budget price, giving everyone the chance to take full advantage of CDM lighting. Full fixture light - ballast, reflector. Can be used as a.

Light or as a supplemental. Extremely high levels of PAR.

CDM lamps create superior plant usable light, like having sunshine indoors. Lower heat output than standard HPS lighting. Option Contains: 1x LUMii Solar 315w CDM Grow Light Fixture or 1x Elite 315w CDM Grow Light Fixture.

42cm x 27cm x 15cm. How Does the LUMii Solar 315w CDM Grow Light Work. Ceramic discharge metal halide lamps are made with a ceramic arc tube instead of typical composites, like quartz. This allows the lamp to operate at higher temperatures.

When the ballast ignites the gases within the lamp, the light it emits has a full spectrum that increases the growth and. The LUMii Solar 315w CDM Grow Light reflects high levels of light down to your plants and spreads it evenly, thanks to the highly polished dimpled reflector.

Using the LUMii Solar 315w CDM Grow Light. Simply hang the unit over the.

Of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain. Always screw the lamp into the lamp-holder in your reflector as tightly as possible by gripping the lamp with a clean, dry cloth. If the lamp is not screwed in as tightly as possible, arcing can occur between the. Contact of the lamp and the lamp-holder. This melts the solder contact on the bottom of the lamp, causing damage and making it.

Make sure that the lamp is clean and completely free of fingerprints and other contaminants. Connect the input lead of your reflector to the output lead of the ballast, ensuring the cable is not pulled tight and does not encounter anything hot e. The wattage of your ballast MUST match the wattage of the lamp you are using or there will be a high risk of fires or equipment damage. Connect the mains plug into an electrical outlet socket and switch on.

The ballast will start-up and light the lamp. PLEASE NOTE: The 315w CDM lamps need to be bedded in as follows: on first. The lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly. FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE!

Discharge lamps are switched on they run extremely hot. It is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

Channel Islands: All postcodes containing GY and JE Isle of Man: All postcodes containing IM Scilly Isles: TR21-TR25 Scotland: All postcodes containing TR21-TR25 / AB37-AB56 Scottish Islands: All postcodes containing KW / HS1-HS9 / IV40-IV49 / IV51 / IV55-IV56 / KA27-KA28 / PA20-PA80 / PH4-PH50 / ZE1-ZE3 Scottish Highlands: All postcodes containing AB and IV / KW1-KW14 / PA20-PA38 / PA68 / PH80 / PH36-PH49 Northern Ireland: All postcodes containing BT Isle of Wight: PO30-PO41 Isle of Angelsey: LL Isle of Man: IM1-9. We use the best couriers available to us to ensure that your product is received on time and in great condition. Please ensure that someone is available to sign for the item as signatures are required. Your satisfaction is important to us and we always aim to provide the best products and service to all our customers.

The item "Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit" is in sale since Wednesday, December 13, 2017. This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Grow Light Kits". The seller is "gardeners-corner" and is located in Grimsby. This item can be shipped worldwide.

  • Brand: LUMii
  • Bulbs: Please select if needed from drop down menu
  • MPN: CDM-SOLAR
  • Plug: UK Plug Supplied
  • Quantity: 1
  • Type: MH (Metal Halide)
  • Wattage: 315w or 630w


Hydroponics 315w or 630w LUMii Solar Fixture & Elite CDM Bulb Grow Light Kit