The new LUMii® Compacta 600w, has been redesigned for improved quality and high output, and continues to boast a fully enclosed and potted case. As with all LUMii® ballasts, you are able to get the true output that your plants need. At different times in the growing cycle, plants require different types of light radiation. Immature plants have different needs to those about to mature. To maximise the potential of a plant and ensure that it grows strong and healthy, you need to deliver just the right kind of light radiation.These bulbs have been enhanced to produce the perfect balance of blue and red light and benefit your plants at crucial stages in their development. The SunBlaster Dual Spectrum lamp is scientifically designed and developed for the complete lifecycle of a plant. This produces the full light spectrum with added blue for the propagation and vegging stages.
Although these lamps are produced to an extremely high standard, the performance will drop off over time. We recommend you replace lamps every 3-6 months to avoid diminishing harvests. SunBlaster 600 watt - 93,000 Lumens. Please keep the retail packaging in case you need to return it to us.Bulbs sent without the original packaging are not covered by warrant. It is an open ended highly polished and dimpled lightweight reflector which gives an efficient and even distribution of light. Unlike others on the market, the LUMii MAXii includes a unique lamp holder that is adjustable and designed to fit all E40 lamp types. All earth requirements are incorporated into the lamp holder itself. This safety feature means that there is no need for additional components.
With the LUMii MAXii system and the CFL Converter Ki, t you can use a cool CFL lamp for vegetative growth. Then if you are flowering switch to an HPS lamp by simply unplugging the converter plug and plugging into a LUMii ballast; all without taking your reflector down or changing it.
No other reflector does this - it is easy! L: 470mm x W: 430mm x H: 190mm The LUMii MAXii comes as a complete HID reflector set and is supplied with hanging hooks as per picture.Size: MAX 2m² - 1.95m x 1.95m x 1.95m. The LightHouse MAX 2m² has 25mm poles and has 4 options for extraction through the roof or the side. Also there is a base side inlet with a 300mm (12) ducting gland as well as 2 x one piece waterproof insert tray. There are 4 x inline 300mm (12") socks for use with air-cooled lighting and 4 x 100mm (4") cable glands. This tent has 6 x low level passive air vents with fine (anti-mite) mesh that includes light proof covers for when they are not in use and 8 filter straps.
Two side doors are included for easy access to the crop. It is recommended for a four lamp set up (4 x 400w HID) and an extraction fan around 1100m3. PowerPlant Heavy Duty Timer - Please select if needed. Normal household timers are not built to take the high inductive loads produced by HID ballasts.If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on. The PowerPlant Heavy Duty Timer is different.
It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast. It has a 96 switching operations within a 24 hour period (every 15 minues). This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers. This unit is ideal for timing 400w and 600w ballasts.
Do not use more than one 600w ballast per timer. FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3 Air Flow Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture) Carbon Filter Size To get the most out of your kit, please follow these few tips: Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.
Always mount your filter as high as possible. Hot air naturally rises and so will your odours! Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter. Do Not mount your Filter near to humidifiers.
Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours! Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan. The item "Complete Hydroponic Grow Room Tent Fan Filter 2 x 600 watt Light Kit 200x200x200" is in sale since Thursday, November 12, 2015.
This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Other Hydroponics". The seller is "hydroponics4less" and is located in Solihull. This item can be shipped worldwide.