Samsung lm561c S6 BIN 96 DIODE STRIPS. 4 - 40mm x 430mm heatsinks. OR 2 - 40mm x 830mm heatsinks(must request in remarks or 430mm will be sent by default). 2 - pcs 1/2" 18ga aluminum angle in 18" or 24.
30mm double sided Thermal tape pre-applied to boards. Meanwell HLG-150H-24B w/wago connectors for power and led hookup. 3 ft Power cord for driver(6-footer available). Optional pre-wired dimmer switch available. 5 feet of solid core 18ga wire to hook strips up.
Assorted screws(to build frame). Dual Connectors(easier to wire in series and/or parallel). This listing is for 4 of these strips with heatsinks to mount them on, aluminum angle(2 each of 18" or 24" length) to build a frame with and everything you need to get them growing, including a Meanwell HLG-150H-24B, power cable for driver and we even offer the option of a prewired dimmer for the driver. We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus the benefit of transferring the heat to the heatsink much better.
All you will need is a drill and 1/8 bit and a good phillips screwdriver. These are 30mmx400mm (approximately 1.2 inch x 16 inches) 96 Diode Strips using the Samsung lm561c S6 bin diodes. You can get either 4 of the 40mm x 430mm heatsinks or 2 of the 40mm x 830mm heatsinks(put in remarks which you want or we will send the 430mm by default). Either size will make it easy to build a frame for your light as well as keep your strips cooler, thus increasing the efficiency and the life of your strips.These do use the same true Samsung lm561c diodes in the S6 bin, which is the top bin for this diode and these also have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series. For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips.
This listing is for 4 of the 3500k strips. I also have the 6500k(recommended for vegetation) and the 2700k(which is recommended for the flowering stage). There are many other configurations that work(too many for me to list), but plenty of resources out there to learn a little about wiring them different ways to help you decide which way you wanna set yours up. If you don't know any, just ask and I can point you to one or two great ones or I will answer any questions you have.
Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know. The item "4 x Sun Board w / heatsinks DIY kit Samsung lm561c LEDs Quantum Light HLG Driver" is in sale since Sunday, September 1, 2019. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics & Seed Starting\Grow Light Kits".
The seller is "ucandewit" and is located in Erwin, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Ecuador, Guadeloupe, Iceland, Luxembourg, Maldives, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.