A premium quality air-cooled reflector. With a far superior build quality to its competitors.The toughened glass is secured by a completely air tight, high-quality seal, which gives powerful air-cooling capabilities. The glass and frame have a handy hinge and retention cables, this allows the glass and frame to be opened easily along the longer front side for cleaning and to access your bulb, the retention cables stop the frame from dropping meaning you have not got to worry about shattering your glass so all of this can be done when the lights are installed.
Inside you will find a highly reflective aluminium reflector covering all for sides for even more light output! The outside is also completely in-cased in a white powder coated finish, this helps keep heat within the reflector so the air passing through it can expel it instead of it leaking into the grow room and raising your temperatures. We recommend around 200m3/h of air per reflector to ensure efficient cooling.
Simply multiply this figure by the amount of reflectors you have to work out which size fan you require. Always try to connect your reflectors in straight rows/runs with minimal bends in the ducting. Reflector size: 67cm x 57.5cm x 31cm. Introducing the amazing new 1000w Lumatek Digital Ballast. This state of the art digital lighting ballast is one of the most powerful and reliable digital ballasts currently available today.With 30% more lumens than a standard magnetic ballast, the Lumatek 1000w actually yet uses far less energy too - making it more economic to run and giving higher yields than previously possible. Featuring 4 different settings, including Super Lumens - the Lumatek 1000w Digital Ballast can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps.
This fantastic Dimmable Digital Ballast is so reliable it comes with an amazing 5 year guarantee and also has an in-built cut off switch, to protect against electrical surges. The Lumatek 1000w grow light also features a fast start up facility and generates much less heat than other conventional ballasts. Enjoy longer bulb-life too with this high capacity digital ballast, as the Lumatek 1000w is incredibly stable and reliable, ensuring unbeatable grow room results. Electronic ballast for 1000w, 750w or 600w HPS lamp or 1000w or 600w MH lamp. Voltage range: 175 to 275V.No audible noise, no flicker. Enviroment temperature for full load operation: -25 to 40°C (-13 to 104°F). Humidity: capable of operating in relative humidity of 0% to 90%, non-condensing. To light a 600W lamp; set control to 600W. To light a 750W lamp; set control to 750W and dim down to 600W. To light a 1000W lamp; set control to 1000W and boost output by 10% by switching to'Super Lumens' or dim down to 750W or 600W. Lamp Current (A): 10.3A. The item "1000w Lumatek Digital Ballast High PAR Bulb Maxibright Goldstar Grow Light Kit" is in sale since Friday, March 2, 2018. This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Grow Light Kits". The seller is "hortiworks" and is located in Gravesend. This item can be shipped to all countries in Europe.